Sale!

Description

Kross Travertine Look Porcelain Tile

Kross brings the rustic yet refined look of classic cross-cut travertine to your home. Multiple tile faces, a soft natural texture and a neutral colour palette give each room a relaxed, luxurious feel.

SmoothGrip texture

Every Kross tile has a Matt SmoothGrip finish, made for both indoor and outdoor areas. You can run the same tile from your living area straight out to the patio.

Formats and edges

Kross is available in 300×600, 600×600 and 600×1200. Colours vary by size, so choose your colour and size from the dropdowns above.

All sizes have rectified edges, which are laid with a tight joint for less visible grout lines and a modern look.

A V2 moderate variation means the travertine faces vary in tone and pattern across the floor.

Inside to alfresco

Kross covers floors, walls and outdoor areas, from bathrooms and living rooms out to patios and alfresco spaces.

Specifications

  • Material: Porcelain
  • Look: Cross-cut travertine
  • Colours: White, Light Bianco, Beige, Light Grey, Mid Grey and Charcoal (varies by size)
  • Sizes: 300×600, 600×600 and 600×1200
  • Finish: Matt SmoothGrip
  • Slip rating: P5 on the Matt SmoothGrip tiles (300×600, 600×600 and 600×1200). Ratings are indicative and can vary from batch to batch.
  • Edge: Rectified
  • Variation: V2 – Moderate
  • Suitable for: Floors, walls and outdoor areas

Try Kross at home first. Order a Kross sample to see the neutral palette against your fittings.

Browse our Tiles, Bathroom Vanities and Bathroom Tapware for everything else.

Add the Kross to your cart above.

Additional information

Tile Colour

Beige, Charcoal, Light Bianco, Light Grey, Mid Grey, White

Tile Size

300×600, 600×600, 600×1200

Tile Finish

Matt SmoothGrip

Kross

From $42.25m²

Per m²

Kross brings the rustic, refined look of cross-cut travertine to your floors, walls and outdoor areas. Choose from six neutral colours in 300×600, 600×600 and 600×1200, all in Matt SmoothGrip.

 

Get A Sample

SKU Kross Categories , ,
Builders Warehouse Online

Care and Maintenance

Tiles ask very little, and the routine matters more than the product. Regular sweeping and washing stops grit building up, protects the surface finish and makes a deep clean far less of a job.

Based on the guidance in AS 3958.1–2007, Appendix C. General advice only — tile types, finishes and installation conditions vary. If you are not sure what suits your tiles, check with a qualified tiler.

Everyday cleaning
  • Sweep or vacuum before you mop. Loose grit is what scratches a floor, not foot traffic.
  • Mop with warm water and a pH-neutral, sulphate-free cleaner.
  • Rinse with clean water and do not let the cleaner dry on the tile — residue is what causes streaks and dulls a finish.
  • Wipe spills as they happen. Grout takes up a spill faster than the tile does.
Occasional deep clean
  • Use a high-alkaline detergent, above pH 9, for greasy build-up in kitchens and entries.
  • On textured or structured tiles, let the cleaner sit for a few minutes before scrubbing so it can work into the surface.
  • Steam or pressure cleaning can be used from time to time.
  • Always finish with a clean water rinse.
After a new floor is laid
  • Let the grout cure for as long as your tiler specifies before washing the floor properly.
  • A light film of grout haze is normal. It needs the right product to remove — ask your tiler rather than reaching for a household cleaner.
  • Keep mats and rugs off a new floor until the adhesive and grout have fully cured.
Keeping it that way
  • Mats at every external door, including wherever pets come in and out.
  • More cleaning product is not better. Over-applying leaves a residue that holds dirt.
  • Skip household soaps. They leave a film that reads as slippery and dull.
  • Felt pads under furniture legs, and lift rather than drag anything heavy.
  • If rinsing is awkward, use a no-rinse detergent instead of leaving residue behind.
Safe to use, and what to avoid

Safe to use

  • pH-neutral, sulphate-free cleaners for everyday use
  • Soft brushes and non-abrasive cleaning pads
  • High-alkaline detergent, occasionally, for grease
  • Proprietary abrasive cleaners on unglazed tile only

Avoid

  • Acidic cleaners — they attack grout and haze a glazed surface
  • Abrasive pads on glazed tile
  • Overusing high-alkaline detergent
  • Scrubbing machines fitted with coarse pads
  • Wax and oil-based polishes