Sale!

Description

Kmg Imperial Concrete Look Porcelain Tile

Kmg Imperial brings a modern industrial concrete look to your home or workspace. Clean lines and subtle grey and taupe tones give floors and walls the character of concrete in a glazed tile.

True concrete matt

The Matt finish keeps the surface soft and low in sheen for a true concrete feel.

Two sizes, rectified

Kmg Imperial is available in two sizes: 300×600 and 600×600.

Both sizes have rectified edges, which are laid with a tight joint for less visible grout and a clean, modern finish.

The range has a V2 moderate variation, so there are clear differences in tone from tile to tile, just like real concrete.

Homes and workspaces

Kmg Imperial is suitable for floors and walls in homes and light commercial spaces, including bathrooms, kitchens and living areas.

Specifications

  • Material: Glazed porcelain
  • Look: Concrete
  • Colours: Light Grey, Dark Grey, Charcoal and Taupe (Charcoal in 300×600 only, Taupe in 600×600 only)
  • Sizes: 300×600 and 600×600
  • Finish: Matt
  • Edge: Rectified
  • Variation: V2 – Moderate
  • Suitable for: Floors and walls

See the concrete tones in person. A Kmg Imperial sample lets you compare the greys and taupe in your space.

Round out the project with Bathroom Vanities, Bathroom Tapware and more Tiles.

Add the Kmg Imperial to your cart above.

Additional information

Tile Colour

Charcoal, Dark Grey, Light Grey, Taupe

Tile Size

300×600, 600×600

Tile Finish

Matt

Kmg Imperial

$29.85m²

Per m²

Kmg Imperial brings a modern industrial concrete look to your floors and walls. Choose from Light Grey and Dark Grey in 300×600 and 600×600, Charcoal in 300×600, plus Taupe in 600×600, all with a Matt finish.

 

Get A Sample

SKU KMG Imperial Categories ,
Builders Warehouse Online

Care and Maintenance

Tiles ask very little, and the routine matters more than the product. Regular sweeping and washing stops grit building up, protects the surface finish and makes a deep clean far less of a job.

Based on the guidance in AS 3958.1–2007, Appendix C. General advice only — tile types, finishes and installation conditions vary. If you are not sure what suits your tiles, check with a qualified tiler.

Everyday cleaning
  • Sweep or vacuum before you mop. Loose grit is what scratches a floor, not foot traffic.
  • Mop with warm water and a pH-neutral, sulphate-free cleaner.
  • Rinse with clean water and do not let the cleaner dry on the tile — residue is what causes streaks and dulls a finish.
  • Wipe spills as they happen. Grout takes up a spill faster than the tile does.
Occasional deep clean
  • Use a high-alkaline detergent, above pH 9, for greasy build-up in kitchens and entries.
  • On textured or structured tiles, let the cleaner sit for a few minutes before scrubbing so it can work into the surface.
  • Steam or pressure cleaning can be used from time to time.
  • Always finish with a clean water rinse.
After a new floor is laid
  • Let the grout cure for as long as your tiler specifies before washing the floor properly.
  • A light film of grout haze is normal. It needs the right product to remove — ask your tiler rather than reaching for a household cleaner.
  • Keep mats and rugs off a new floor until the adhesive and grout have fully cured.
Keeping it that way
  • Mats at every external door, including wherever pets come in and out.
  • More cleaning product is not better. Over-applying leaves a residue that holds dirt.
  • Skip household soaps. They leave a film that reads as slippery and dull.
  • Felt pads under furniture legs, and lift rather than drag anything heavy.
  • If rinsing is awkward, use a no-rinse detergent instead of leaving residue behind.
Safe to use, and what to avoid

Safe to use

  • pH-neutral, sulphate-free cleaners for everyday use
  • Soft brushes and non-abrasive cleaning pads
  • High-alkaline detergent, occasionally, for grease
  • Proprietary abrasive cleaners on unglazed tile only

Avoid

  • Acidic cleaners — they attack grout and haze a glazed surface
  • Abrasive pads on glazed tile
  • Overusing high-alkaline detergent
  • Scrubbing machines fitted with coarse pads
  • Wax and oil-based polishes