Description
The BRAVO-III Toilet Pan is the pan on its own, supplied with the seat and the connecting pipe. It is designed to run on a concealed in-wall cistern, which is bought separately along with the flush plate.
Pan only — what else you need
To make a working toilet out of this you need three things: the pan, an in-wall cistern, and a flush plate. Buying them separately is the right move when the cistern is already in the wall from a previous fit-out, or when you want a plate finish that is not offered in a packaged suite.
If you are starting from nothing, check whether the matching complete suite works out simpler — it arrives matched and there is nothing to specify wrongly.
An 80mm set-out
80mm is tight, and it is what lets this pan sit right back against the wall. Check your waste position carefully — this is not an adjustable pan, and 80mm is well inside the range most suites are built for.
Rimless
A traditional pan hides the water channel under a lip that runs around the inside of the bowl. Rimless does away with it — the water is directed around an open bowl instead. There is no lip to reach up under with a brush, which is where the staining and the smell usually start in an older toilet. It is the single biggest change to toilet design in the last twenty years, and it is a cleaning decision rather than a flushing one.
Set-out — measure this before you order
The set-out is the distance from the finished wall to the centre of the waste in the floor. Get it wrong and the pan will not sit against the wall, and there is no adjusting it once the floor is tiled.
An S-trap goes down through the floor. A P-trap goes back through the wall. Measure what you have before you order, and if you are unsure, take a photo of the waste with a tape across it and send it to us.
Water rating
4 star WELS, 4.5 litres on a full flush and 3 litres on a half. Four stars is the practical ceiling for a dual flush toilet in Australia, so this is as low as a normal suite goes on water.
Specifications
- Type — floor mounted pan, rimless
- Material — ceramic
- Supplied with — seat and connecting pipe
- Set-out — 80mm (S-trap), 180mm (P-trap)
- Hinge cover finishes — standard, matte black, gun metal, brushed nickel or brushed brass
- Cistern and flush plate — not included
- WELS registration — L07982
- Water rating — 4 star WELS, 4.5L full flush / 3L half flush
- Warranty — 15 years on the ceramic, 3 years on the valves
Explore more
Toilets | Bathroom Accessories | Bathroom Vanities | Bathroom Tapware
