Description

The BRAVO Toilet Suite pairs the BRAVO-III pan with a concealed in-wall cistern, supplied as one purchase with the seat included. Only the pan and the flush plate show in the room.

Two cisterns to choose between

This is the decision that matters on this page, and it is worth understanding before you pick a colour.

• R & T is the standard cistern here, and it comes in the widest choice of plate finishes — chrome square, chrome round, matte black, brushed nickel, brushed brass and gun metal.
• GEBERIT SIGMA8 is the Swiss-made alternative, offered here with a genuine GEBERIT plate in matte white or matte black. GEBERIT is the reference point for in-wall cisterns and parts stay available for a very long time, which is the argument for spending more on the thing you are about to seal inside a wall.

Both do the same job. The R & T gives you finish options; the SIGMA8 gives you the longest parts availability. If the flush plate has to match brushed brass tapware, that decides it for you — GEBERIT does not make one.

In-wall means plan it early

The frame goes in before the wall is sheeted and the cistern needs a cavity behind it. Retro-fitting into a finished bathroom means building a false wall, so this is a decision for the framing stage rather than the fit-off. The valve is serviced through the flush plate opening, so keep that plate accessible.

Rimless

A traditional pan hides the water channel under a lip that runs around the inside of the bowl. Rimless does away with it — the water is directed around an open bowl instead. There is no lip to reach up under with a brush, which is where the staining and the smell usually start in an older toilet. It is the single biggest change to toilet design in the last twenty years, and it is a cleaning decision rather than a flushing one.

Choosing the button finish

The flush button is the one part of a toilet that gets touched every day, and it is the part that either matches the tapware or does not. Pick it against the mixer and the towel rail rather than against the pan — the ceramic is white either way.

Standard or matching hinge covers

The hinge covers are the caps where the seat bolts to the pan. Standard leaves them plain. Matching picks up the button finish, so the black or brass carries from the button through to the seat instead of stopping halfway. It is a small thing that is very obvious once you have seen it done both ways.

Set-out — measure this before you order

The set-out is the distance from the finished wall to the centre of the waste in the floor. Get it wrong and the pan will not sit against the wall, and there is no adjusting it once the floor is tiled.

An S-trap goes down through the floor. A P-trap goes back through the wall. Measure what you have before you order, and if you are unsure, take a photo of the waste with a tape across it and send it to us.

Specifications

• Type — rimless pan on a concealed in-wall cistern
• Material — ceramic
• Set-out — 80mm (S-trap), 180mm (P-trap)
• Cistern weight — 3kg
• Pan weight — 34kg
• Cistern options — R & T, or GEBERIT SIGMA8
• Flush plate finishes, R & T — chrome square, chrome round, matte black, brushed nickel, brushed brass, gun metal
• Flush plate finishes, GEBERIT — matte white, matte black
• Toilet hinge covers — standard, or matching the flush plate
• Seat — included
• WELS registration — L07982
• Water rating — 4 star WELS, 4.5L full flush / 3L half flush
• Warranty — 15 years on the ceramic, 3 years on the valves

Explore more

Toilets  |  Bathroom Accessories  |  Bathroom Vanities  |  Bathroom Tapware