Sale!

Description

Vemac Marble Look Porcelain Tile

Vemac is an authentic marble look tile for homes and businesses that want a refined, elegant finish. A subtle stone pattern is lifted by a crystal glaze that catches the light like quartz veining.

Matt with a crystal glaze

Vemac has a skin touch Matt finish with a textured surface that feels like natural stone, keeping the look soft and understated.

Sizes and grout joints

Vemac is available in two sizes: 600×600 and a large 600×1200.

Both sizes have rectified edges, which keep grout joints small for a seamless look that is true to natural marble.

Vemac has a V2 moderate variation, so the marble pattern differs subtly from tile to tile.

Homes and businesses

Vemac suits bathrooms, kitchens, living areas and entries where you want a clean white marble look.

Specifications

  • Material: Porcelain
  • Look: Marble
  • Colour: White
  • Sizes: 600×600 and 600×1200
  • Finish: Matt
  • Edge: Rectified
  • Variation: V2 – Moderate

See the crystal glaze catch the light. Order a Vemac sample to view it in your own room.

Add Bathroom Vanities and Bathroom Tapware, or browse the rest of our Tiles.

Add the Vemac to your cart above.

Additional information

Tile Colour

White

Tile Size

600×600, 600×1200

Tile Finish

Matt

Vemac

From $42.25m²

Per m²

Vemac brings a clean white marble look with crystal glaze detail that catches the light like quartz. Available in White in 600×600 and 600×1200, with a soft skin touch Matt finish.

 

Get A Sample

SKU Vemac Categories ,
Builders Warehouse Online

Care and Maintenance

Tiles ask very little, and the routine matters more than the product. Regular sweeping and washing stops grit building up, protects the surface finish and makes a deep clean far less of a job.

Based on the guidance in AS 3958.1–2007, Appendix C. General advice only — tile types, finishes and installation conditions vary. If you are not sure what suits your tiles, check with a qualified tiler.

Everyday cleaning
  • Sweep or vacuum before you mop. Loose grit is what scratches a floor, not foot traffic.
  • Mop with warm water and a pH-neutral, sulphate-free cleaner.
  • Rinse with clean water and do not let the cleaner dry on the tile — residue is what causes streaks and dulls a finish.
  • Wipe spills as they happen. Grout takes up a spill faster than the tile does.
Occasional deep clean
  • Use a high-alkaline detergent, above pH 9, for greasy build-up in kitchens and entries.
  • On textured or structured tiles, let the cleaner sit for a few minutes before scrubbing so it can work into the surface.
  • Steam or pressure cleaning can be used from time to time.
  • Always finish with a clean water rinse.
After a new floor is laid
  • Let the grout cure for as long as your tiler specifies before washing the floor properly.
  • A light film of grout haze is normal. It needs the right product to remove — ask your tiler rather than reaching for a household cleaner.
  • Keep mats and rugs off a new floor until the adhesive and grout have fully cured.
Keeping it that way
  • Mats at every external door, including wherever pets come in and out.
  • More cleaning product is not better. Over-applying leaves a residue that holds dirt.
  • Skip household soaps. They leave a film that reads as slippery and dull.
  • Felt pads under furniture legs, and lift rather than drag anything heavy.
  • If rinsing is awkward, use a no-rinse detergent instead of leaving residue behind.
Safe to use, and what to avoid

Safe to use

  • pH-neutral, sulphate-free cleaners for everyday use
  • Soft brushes and non-abrasive cleaning pads
  • High-alkaline detergent, occasionally, for grease
  • Proprietary abrasive cleaners on unglazed tile only

Avoid

  • Acidic cleaners — they attack grout and haze a glazed surface
  • Abrasive pads on glazed tile
  • Overusing high-alkaline detergent
  • Scrubbing machines fitted with coarse pads
  • Wax and oil-based polishes