Sale!

Description

Timeless Travertine Look Porcelain Tile

Timeless brings the classic look of cross-cut travertine to your home, with the practicality and easy maintenance of porcelain. It suits everything from traditional to modern classic design, on floors and walls, inside and out.

Which option do I choose?

  • 300×600 and 600×600: smooth Matt tiles for indoor floors and walls.
  • 300×600 Structured and 600×600 Structured: textured surface for outdoor areas.
  • 600x600x20: a 20mm thick Structured paver for outdoor paving.
  • 400x600x20 Bullnose: a 20mm thick piece with a rounded edge, made to match the pavers.

Sizes, pavers and edges

The tiles have rectified edges, which are laid with a tight joint for less visible grout lines and a modern look.

Timeless has a V2 moderate variation, so the cross-cut travertine pattern moves naturally from tile to tile.

Indoor and outdoor use

It is at home on floors and walls in houses and light commercial spaces. Use the Matt tiles indoors, and the Structured tiles, 20mm pavers and bullnose pieces for outdoor areas.

Specifications

  • Material: Porcelain
  • Look: Cross-cut travertine
  • Colours: Classic, Silver and White
  • Tiles: 300×600 and 600×600 (Matt or Structured)
  • Paver: 600x600x20 Structured
  • Bullnose: 400x600x20
  • Edge: Rectified
  • Variation: V2 – Moderate
  • Suitable for: Matt indoors. Structured, pavers and bullnose outdoors.

Compare Classic, Silver and White. Order a Timeless sample to see which tone suits your space.

Take a look at our Tiles, Bathroom Vanities and Bathroom Tapware to complete the project.

Add the Timeless to your cart above.

Additional information

Tile Colour

Classic, Silver, White

Tile Size

300×600, 300×600 Structured, 400x600x20 Bullnose, 600×600, 600x600x20, 600×600 Structured

Tile Finish

Matt

Timeless

From $38.10m²

Per m²

Timeless brings the classic look of cross-cut travertine to your home, inside and out. Choose from Classic, Silver and White in 300×600 and 600×600 tiles, 600x600x20 pavers and 400x600x20 bullnose.

 

Get A Sample

SKU Timeless Categories , ,
Builders Warehouse Online

Care and Maintenance

Tiles ask very little, and the routine matters more than the product. Regular sweeping and washing stops grit building up, protects the surface finish and makes a deep clean far less of a job.

Based on the guidance in AS 3958.1–2007, Appendix C. General advice only — tile types, finishes and installation conditions vary. If you are not sure what suits your tiles, check with a qualified tiler.

Everyday cleaning
  • Sweep or vacuum before you mop. Loose grit is what scratches a floor, not foot traffic.
  • Mop with warm water and a pH-neutral, sulphate-free cleaner.
  • Rinse with clean water and do not let the cleaner dry on the tile — residue is what causes streaks and dulls a finish.
  • Wipe spills as they happen. Grout takes up a spill faster than the tile does.
Occasional deep clean
  • Use a high-alkaline detergent, above pH 9, for greasy build-up in kitchens and entries.
  • On textured or structured tiles, let the cleaner sit for a few minutes before scrubbing so it can work into the surface.
  • Steam or pressure cleaning can be used from time to time.
  • Always finish with a clean water rinse.
After a new floor is laid
  • Let the grout cure for as long as your tiler specifies before washing the floor properly.
  • A light film of grout haze is normal. It needs the right product to remove — ask your tiler rather than reaching for a household cleaner.
  • Keep mats and rugs off a new floor until the adhesive and grout have fully cured.
Keeping it that way
  • Mats at every external door, including wherever pets come in and out.
  • More cleaning product is not better. Over-applying leaves a residue that holds dirt.
  • Skip household soaps. They leave a film that reads as slippery and dull.
  • Felt pads under furniture legs, and lift rather than drag anything heavy.
  • If rinsing is awkward, use a no-rinse detergent instead of leaving residue behind.
Safe to use, and what to avoid

Safe to use

  • pH-neutral, sulphate-free cleaners for everyday use
  • Soft brushes and non-abrasive cleaning pads
  • High-alkaline detergent, occasionally, for grease
  • Proprietary abrasive cleaners on unglazed tile only

Avoid

  • Acidic cleaners — they attack grout and haze a glazed surface
  • Abrasive pads on glazed tile
  • Overusing high-alkaline detergent
  • Scrubbing machines fitted with coarse pads
  • Wax and oil-based polishes