Sale!

Description

Memory Stone Stone Look Porcelain Tile

Memory Stone is where minimal design meets natural texture. Soft mineral tones and delicate flaked detail give each tile the look of aged, weathered stone, creating a calm and understated feel in any room.

Matt Finish

The Matt finish keeps the surface soft and low in sheen, letting the gentle stone pattern and subtle shifts in tone come through.

Sizes and texture

Memory Stone is available in two sizes: 600×600 and 600×1200.

Both sizes have rectified edges, cut clean and square for narrow grout joints.

With a V2 moderate variation, the flaked mineral detail changes from tile to tile like aged stone.

Where it fits

Memory Stone is suitable for floors and walls in homes and commercial spaces, from bathrooms and kitchens to living areas.

Specifications

  • Material: Porcelain
  • Look: Stone
  • Colours: Bianco, Beige and Silver
  • Sizes: 600×600 and 600×1200
  • Finish: Matt
  • Edge: Rectified
  • Variation: V2 – Moderate
  • Suitable for: Floors and walls

Feel the texture before you commit. Order a Memory Stone sample to see the flaked detail up close.

Then pick out Bathroom Vanities, Bathroom Tapware and more Tiles to suit.

Add the Memory Stone to your cart above.

Additional information

Tile Colour

Beige, Bianco, Silver

Tile Size

600×600, 600×1200

Tile Finish

Matt

Memory Stone

From $41.20m²

Per m²

Memory Stone pairs a minimal look with the soft, weathered texture of natural stone. Choose from Bianco, Beige and Silver in 600×600 and 600×1200, with a soft Matt finish.

 

Get A Sample

SKU Memory Stone Categories ,
Builders Warehouse Online

Care and Maintenance

Tiles ask very little, and the routine matters more than the product. Regular sweeping and washing stops grit building up, protects the surface finish and makes a deep clean far less of a job.

Based on the guidance in AS 3958.1–2007, Appendix C. General advice only — tile types, finishes and installation conditions vary. If you are not sure what suits your tiles, check with a qualified tiler.

Everyday cleaning
  • Sweep or vacuum before you mop. Loose grit is what scratches a floor, not foot traffic.
  • Mop with warm water and a pH-neutral, sulphate-free cleaner.
  • Rinse with clean water and do not let the cleaner dry on the tile — residue is what causes streaks and dulls a finish.
  • Wipe spills as they happen. Grout takes up a spill faster than the tile does.
Occasional deep clean
  • Use a high-alkaline detergent, above pH 9, for greasy build-up in kitchens and entries.
  • On textured or structured tiles, let the cleaner sit for a few minutes before scrubbing so it can work into the surface.
  • Steam or pressure cleaning can be used from time to time.
  • Always finish with a clean water rinse.
After a new floor is laid
  • Let the grout cure for as long as your tiler specifies before washing the floor properly.
  • A light film of grout haze is normal. It needs the right product to remove — ask your tiler rather than reaching for a household cleaner.
  • Keep mats and rugs off a new floor until the adhesive and grout have fully cured.
Keeping it that way
  • Mats at every external door, including wherever pets come in and out.
  • More cleaning product is not better. Over-applying leaves a residue that holds dirt.
  • Skip household soaps. They leave a film that reads as slippery and dull.
  • Felt pads under furniture legs, and lift rather than drag anything heavy.
  • If rinsing is awkward, use a no-rinse detergent instead of leaving residue behind.
Safe to use, and what to avoid

Safe to use

  • pH-neutral, sulphate-free cleaners for everyday use
  • Soft brushes and non-abrasive cleaning pads
  • High-alkaline detergent, occasionally, for grease
  • Proprietary abrasive cleaners on unglazed tile only

Avoid

  • Acidic cleaners — they attack grout and haze a glazed surface
  • Abrasive pads on glazed tile
  • Overusing high-alkaline detergent
  • Scrubbing machines fitted with coarse pads
  • Wax and oil-based polishes