Sale!

Description

Luxe Handmade Look Ceramic Wall Tile

Luxe is inspired by the charm of handmade tiles, giving a much loved vintage look a modern update. Its gentle wave design catches the light across the wall for a soft, crafted feel.

Which finish do I choose?

  • Gloss: shiny surface that shows off the wave design as the light moves across it.
  • Matt: flat, non-shiny surface for a softer, more natural look.

Sizes and colour

Luxe is available in two sizes: 76×152 subway and 100×100 square.

Luxe has cushioned edges, a gently rounded top edge that makes it easy to lay.

Luxe has a V0 monochromatic variation, so each tile is one even colour.

Walls it suits

Luxe is made for walls only. It is a natural choice for kitchen splashbacks, bathroom and shower walls, laundries and feature walls.

Specifications

  • Material: Ceramic
  • Look: Handmade, with a wave design
  • Colours: Daylight White, Beige and Ash Grey
  • Sizes: 76×152 and 100×100
  • Finishes: Gloss and Matt
  • Edge: Cushion edge
  • Variation: V0 – Monochromatic
  • Suitable for: Walls only

See the wave design up close. A Luxe sample shows how the surface catches the light.

Pair it with our Bathroom Tapware and Bathroom Vanities, or explore more Tiles.

Add the Luxe to your cart above.

Additional information

Tile Colour

Ash Grey, Beige, Daylight White

Tile Size

76×152, 100×100

Tile Finish

Gloss, Matt

Luxe

$49.45m²

Per m²

Luxe gives the charm of handmade tiles a modern update with a gentle wave design. Choose from Daylight White, Beige and Ash Grey in 76×152 and 100×100, in Gloss or Matt.

 

Get A Sample

SKU Luxe Categories ,
Builders Warehouse Online

Care and Maintenance

Tiles ask very little, and the routine matters more than the product. Regular sweeping and washing stops grit building up, protects the surface finish and makes a deep clean far less of a job.

Based on the guidance in AS 3958.1–2007, Appendix C. General advice only — tile types, finishes and installation conditions vary. If you are not sure what suits your tiles, check with a qualified tiler.

Everyday cleaning
  • Sweep or vacuum before you mop. Loose grit is what scratches a floor, not foot traffic.
  • Mop with warm water and a pH-neutral, sulphate-free cleaner.
  • Rinse with clean water and do not let the cleaner dry on the tile — residue is what causes streaks and dulls a finish.
  • Wipe spills as they happen. Grout takes up a spill faster than the tile does.
Occasional deep clean
  • Use a high-alkaline detergent, above pH 9, for greasy build-up in kitchens and entries.
  • On textured or structured tiles, let the cleaner sit for a few minutes before scrubbing so it can work into the surface.
  • Steam or pressure cleaning can be used from time to time.
  • Always finish with a clean water rinse.
After a new floor is laid
  • Let the grout cure for as long as your tiler specifies before washing the floor properly.
  • A light film of grout haze is normal. It needs the right product to remove — ask your tiler rather than reaching for a household cleaner.
  • Keep mats and rugs off a new floor until the adhesive and grout have fully cured.
Keeping it that way
  • Mats at every external door, including wherever pets come in and out.
  • More cleaning product is not better. Over-applying leaves a residue that holds dirt.
  • Skip household soaps. They leave a film that reads as slippery and dull.
  • Felt pads under furniture legs, and lift rather than drag anything heavy.
  • If rinsing is awkward, use a no-rinse detergent instead of leaving residue behind.
Safe to use, and what to avoid

Safe to use

  • pH-neutral, sulphate-free cleaners for everyday use
  • Soft brushes and non-abrasive cleaning pads
  • High-alkaline detergent, occasionally, for grease
  • Proprietary abrasive cleaners on unglazed tile only

Avoid

  • Acidic cleaners — they attack grout and haze a glazed surface
  • Abrasive pads on glazed tile
  • Overusing high-alkaline detergent
  • Scrubbing machines fitted with coarse pads
  • Wax and oil-based polishes