Sale!

Description

Limestone Look Porcelain Tile

Limestone brings the calm of natural limestone into your home. Soft, earthy tones and a scattering of fossil detail recall the ancient seabeds the stone comes from, giving each room a relaxed and natural feel.

Silk Finish

The Silk finish is smooth with a gentle sheen, bringing out the soft texture and fossil detail without the glare of a polished tile.

The 600×600 format

Limestone is offered in a single 600×600 size. Its square, rectified edges allow a fine grout joint for a clean finish.

A V2 moderate variation brings changes in tone, texture and fossil detail from tile to tile.

Around the home and outside

Limestone is suitable for floors and walls, inside and outside, from bathrooms and living areas to outdoor spaces.

Specifications

  • Material: Porcelain
  • Look: Limestone
  • Colours: White, Sand and Light Grey
  • Size: 600×600
  • Finish: Silk
  • Edge: Rectified
  • Variation: V2 – Moderate
  • Suitable for: Internal and external floors and walls

See the fossil detail in person. A Limestone sample shows the soft, earthy tones in your own light.

Look through our Tiles, Bathroom Vanities and Bathroom Tapware to finish the room.

Add the Limestone to your cart above.

Additional information

Tile Colour

Light Grey, Sand, White

Tile Size

600×600

Tile Finish

Silk

Limestone

$40.15m²

Per m²

Limestone brings the soft, earthy tones and fossil detail of natural limestone to your floors and walls. Choose from White, Sand and Light Grey in 600×600, with a smooth Silk finish.

 

Get A Sample

SKU Limestone Categories ,
Builders Warehouse Online

Care and Maintenance

Tiles ask very little, and the routine matters more than the product. Regular sweeping and washing stops grit building up, protects the surface finish and makes a deep clean far less of a job.

Based on the guidance in AS 3958.1–2007, Appendix C. General advice only — tile types, finishes and installation conditions vary. If you are not sure what suits your tiles, check with a qualified tiler.

Everyday cleaning
  • Sweep or vacuum before you mop. Loose grit is what scratches a floor, not foot traffic.
  • Mop with warm water and a pH-neutral, sulphate-free cleaner.
  • Rinse with clean water and do not let the cleaner dry on the tile — residue is what causes streaks and dulls a finish.
  • Wipe spills as they happen. Grout takes up a spill faster than the tile does.
Occasional deep clean
  • Use a high-alkaline detergent, above pH 9, for greasy build-up in kitchens and entries.
  • On textured or structured tiles, let the cleaner sit for a few minutes before scrubbing so it can work into the surface.
  • Steam or pressure cleaning can be used from time to time.
  • Always finish with a clean water rinse.
After a new floor is laid
  • Let the grout cure for as long as your tiler specifies before washing the floor properly.
  • A light film of grout haze is normal. It needs the right product to remove — ask your tiler rather than reaching for a household cleaner.
  • Keep mats and rugs off a new floor until the adhesive and grout have fully cured.
Keeping it that way
  • Mats at every external door, including wherever pets come in and out.
  • More cleaning product is not better. Over-applying leaves a residue that holds dirt.
  • Skip household soaps. They leave a film that reads as slippery and dull.
  • Felt pads under furniture legs, and lift rather than drag anything heavy.
  • If rinsing is awkward, use a no-rinse detergent instead of leaving residue behind.
Safe to use, and what to avoid

Safe to use

  • pH-neutral, sulphate-free cleaners for everyday use
  • Soft brushes and non-abrasive cleaning pads
  • High-alkaline detergent, occasionally, for grease
  • Proprietary abrasive cleaners on unglazed tile only

Avoid

  • Acidic cleaners — they attack grout and haze a glazed surface
  • Abrasive pads on glazed tile
  • Overusing high-alkaline detergent
  • Scrubbing machines fitted with coarse pads
  • Wax and oil-based polishes