Sale!

Description

Executive Stone Marble Look Porcelain Tile

Executive Stone captures the elegant, timeless beauty of natural marble in a large format porcelain tile. Multiple tile faces give the random, natural look of real stone across your floors and walls.

Which finish do I choose?

  • Matt: a soft, non-shiny surface that is luxurious to the touch.
  • Polished: high-shine surface that reflects the light and brings out the veining.

Large format and faces

Executive Stone comes in one large size, 600×1200. Its rectified edges are laid with a tight joint for less visible grout and a seamless look.

Its V2 moderate variation, together with multiple faces, gives a random, natural spread of veining.

Where it is used

Executive Stone fits floors and walls in homes and light commercial spaces.

Specifications

  • Material: Porcelain
  • Look: Marble
  • Colours: Arabescato and Calcutta
  • Size: 600×1200
  • Finishes: Matt and Polished
  • Edge: Rectified
  • Variation: V2 – Moderate
  • Suitable for: Floors and walls

Check the veining in your own light. An Executive Stone sample shows the Matt or Polished finish up close.

Browse the rest of our Tiles, plus Bathroom Vanities and Bathroom Tapware.

Add the Executive Stone to your cart above.

Additional information

Tile Colour

Arabescato, Calcutta

Tile Size

600×1200

Tile Finish

Matt, Polished

Executive Stone

$44.30m²

Per m²

Executive Stone brings the elegant look of natural marble to your floors and walls in a large 600×1200 porcelain tile. Choose from Arabescato and Calcutta, in Matt or Polished.

 

Get A Sample

SKU Executive Stone Categories ,
Builders Warehouse Online

Care and Maintenance

Tiles ask very little, and the routine matters more than the product. Regular sweeping and washing stops grit building up, protects the surface finish and makes a deep clean far less of a job.

Based on the guidance in AS 3958.1–2007, Appendix C. General advice only — tile types, finishes and installation conditions vary. If you are not sure what suits your tiles, check with a qualified tiler.

Everyday cleaning
  • Sweep or vacuum before you mop. Loose grit is what scratches a floor, not foot traffic.
  • Mop with warm water and a pH-neutral, sulphate-free cleaner.
  • Rinse with clean water and do not let the cleaner dry on the tile — residue is what causes streaks and dulls a finish.
  • Wipe spills as they happen. Grout takes up a spill faster than the tile does.
Occasional deep clean
  • Use a high-alkaline detergent, above pH 9, for greasy build-up in kitchens and entries.
  • On textured or structured tiles, let the cleaner sit for a few minutes before scrubbing so it can work into the surface.
  • Steam or pressure cleaning can be used from time to time.
  • Always finish with a clean water rinse.
After a new floor is laid
  • Let the grout cure for as long as your tiler specifies before washing the floor properly.
  • A light film of grout haze is normal. It needs the right product to remove — ask your tiler rather than reaching for a household cleaner.
  • Keep mats and rugs off a new floor until the adhesive and grout have fully cured.
Keeping it that way
  • Mats at every external door, including wherever pets come in and out.
  • More cleaning product is not better. Over-applying leaves a residue that holds dirt.
  • Skip household soaps. They leave a film that reads as slippery and dull.
  • Felt pads under furniture legs, and lift rather than drag anything heavy.
  • If rinsing is awkward, use a no-rinse detergent instead of leaving residue behind.
Safe to use, and what to avoid

Safe to use

  • pH-neutral, sulphate-free cleaners for everyday use
  • Soft brushes and non-abrasive cleaning pads
  • High-alkaline detergent, occasionally, for grease
  • Proprietary abrasive cleaners on unglazed tile only

Avoid

  • Acidic cleaners — they attack grout and haze a glazed surface
  • Abrasive pads on glazed tile
  • Overusing high-alkaline detergent
  • Scrubbing machines fitted with coarse pads
  • Wax and oil-based polishes